News

• What Should We Do With The Deformed Steel Grating

  There are many kinds of deformation of the steel grating. The most important thing we should pay attention to is the correction of the steel grating after it is deformed. Do not superfluous,

• What Are The Advantages Of Steel Grating

  1. Material saving: The most economical way to withstand the same load conditions, and correspondingly, it can reduce the material of the supporting structure. 2. Reduce investment: save materials, s

• Sherardizing Technology And New Process Principle

  Sherardizing is a chemical heat treatment in the ferrite state. It uses zinc powder as the raw material, and the heated steel infiltrated parts are in contact with zinc powder under vacuum conditions.

• Characteristics Of Powder Sherardizing Process

  The coating thickness has good uniformity and can be accurately controlled. The thickness of the coating depends only on the process, and has nothing to do with the shape and different positions of th

• Sherardizing Technology And New Process Principle

  Sherardizing is a chemical heat treatment in the ferrite state. It uses zinc powder as the raw material. The heated steel infiltrated parts are in contact with the zinc powder under vacuum conditions.

• Comparison of zinc infiltration and hot-dip galvanizing and electro-galvanizing

  Sherardizing: Generally speaking, sherardizing can obtain a thicker sherardizing layer, with better corrosion resistance and uniform infiltrating layer, which can generally meet the matching requirem

• Characteristics Of Powder Sherardizing Process

  The coating thickness has good uniformity and can be accurately controlled. The thickness of the coating depends only on the process, and has nothing to do with the shape and different positions of th

• Double Ninth Day, Respect and Respect the Elderly

  Anping County Shuangyi Metal Mesh Co., Ltd. wishes you a happy family reunion, all the best, long-lasting happiness and long-term health!

• The Basic Principle Of Powder Sherardizing

  The basic principle of powder sherardizing is to use the penetration and diffusion of metal atoms in the heated state. Under the condition that the temperature is lower than AC1 and the base metal has

• Material Of Steel Parts

  The carbon content of low-carbon structural steel is generally 0.1% to 0.3%, and commonly used materials include Q235, 20 steel, 20Cr, 16Mn, etc. If heat treatment is not used for strengthening, that

• The service life and use environment of steel parts

  a) The corrosion resistance life of the galvanized layer, hot-dip galvanized layer, and electro-galvanized layer is proportional to the thickness of the coating. For parts that require a long corrosio

• Application Of Prefabricated Construction Roll

  The floor plan of the prefabricated building rolls uses the above basic principles to design the ground non-slip galvanized flat steel, which has the appropriate tooth profile and cross-section, and t